ICEPLATE EXO® Gen 3 Ultralight Minimalist Plate Carrier

$499.00 USD
Shipping calculated at checkout.

[ OVERVIEW


ICEPLATE EXO® Gen 3: The Best Defense is a Good Offense

ICEPLATE EXO® Gen 3 ICEPLATE EXO® Gen 3 is the most advanced infantry fighting system available, transcending traditional plate carriers by enhancing physiological performance and shielding operators from environmental harm. Harnessing patented ICEPLATE® and ICEVENTS® thermoregulation and hydration technologies, it weaponizes temperature to extend operational limits and deliver unmatched endurance and effectiveness. For those committed to dominating the battlefield, ICEPLATE EXO® Gen 3 isn’t just the best choice—it’s the only choice.

WHICH VARIANT SHOULD I BUY?
This will depend on your size and use case.

Sizing:

S/M (Small / Medium) - Our S/M option will fit anyone that wears a standard Medium ESAPI armor plate. Medium ESAPI plates are designed to fit the majority of the U.S. military-aged population—typically estimated at ~85% of men and a growing percentage of women.


L/XL (Large / Extra Large) - ICEPLATE EXO® Gen 3 is now available (30 MAY 2025) with plate bags optimized for Large ESAPI plates (10.125" x 13.25").

Based on U.S. Army anthropometric data (ANSUR II), Large plates are typically issued to the top ~10% of military personnel—those over 6'2" or with broader builds that exceed the Medium ESAPI fit envelope.

Same Gen 3 architecture. Same performance. Now in a larger footprint.


Cummerbund Variants:

Side Strap
Buy this if you want the slimmest, lightest, faster variant or if you want to use a different cummerbund.

AXL Equinox Cummerbund Options
Looking for a turnkey, out-of-the-box load-bearing cummerbund with adjustability and quick-release capability? We now offer the AXL Equinox Cummerbund in both sizes:
  • S/M AXL Equinox Cummerbund
    11 MOLLE channels (17.5" long)

  • L/XL AXL Equinox Cummerbund
    14 MOLLE channels (22" long)

When you select the AXL Equinox Cummerbund option, your chosen ICEPLATE EXO® Gen 3 plate bag size (S/M or L/XL) will automatically come paired with the corresponding AXL Equinox Cummerbund size (S/M or L/XL).

For existing Side Strap customers, or if you would prefer a different cummerbund size for your body type, mobility needs, or load carriage preferences, both sizes are also available à la carte here. For additional colors or patterns not listed here, visit axladvanced.com.


Material Variants:

Berry Compliant Material -  This variant is made from Berry Amendment compliant material, meaning the ICEPLATE EXO® Laminate is 100% sourced and manufactured in the U.S. This is essential for large ($150,000+) U.S. Military acquisitions or for those who prefer entirely U.S.-sourced materials.
To learn more about Berry Compliance, click here.

USMCA Compliant Material - 
Our new USMCA variants use laminate made in Mexico, compliant with USMCA standards. This material provides the same strength, durability, and lightweight, hydrophobic properties as our other variants, but at a more accessible price point.

For further information on material differences, check out our article:
What is the difference between USMCA Compliant and Berry Compliant materials?

If you have any further questions about ICEPLATE EXO® Gen 3, check out our FAQ here.


ICEPLATE EXO® Gen 3 is not for beginners or hobbyists. You can buy ICEPLATE EXO® Gen 3 as a complete package. Please note that ICEPLATE EXO® Gen 3 does not have an FR rating.

For L/XL ICEPLATE EXO® Gen 3 customers, please note: ICEPLATE® Curve matches the profile of a Medium ESAPI armor plate and will have some 'slack' if used in ICEPLATE EXO® Gen 3 plate bags. For secure and effective mounting of ICEPLATE® Curve for internal thermoregulation and hydration, add IMS Pro Gen 3 Combo.

Plate Carrier Cooling/Heating/Hydration: add IMS Pro Gen 3 Combo above

Exposed Armor Plates: good or bad? Here is the scientific and engineering truth behind exposed armor plates

IMPORTANT: click here for terms, conditions, and restrictions on body armor purchases.

First Spear® Tubes® Quick-Release Buckles are sold separately per First Spear licensing agreement requirements, but they can be purchased individually here.


Sizing, Armor Plate Compatibility

ICEPLATE EXO® Gen 3 is optimized to work with ICEPLATE Curve® for conformal fit with a Medium ESAPI multi-curve plate profile. Armor plates with the following dimensions will fit:
  • 9.5" x 12.5" up to 1.1" for Medium ESAPI multi-curve or Shooter/Swimmer armor plate profiles.
  • 10" x 12" up to 0.75" thick for Medium SAPI or Shooter/Swimmer plate profiles.
  • Shooter/Swimmer, ESAPI multi-curve, and SAPI footprints all fit, as long as they fall into the dimensions above.

Complete Armor Packages

To purchase a complete ICEPLATE EXO® Armor Package, click here. To learn more about the difference between Level III+ C, Level IV and RF1 Elite multi-curve hard armor plates, click here to go to our IceAge Insights article with full video. For best results, we strongly recommend running the DFNDR Armor Medium Level III+ C Stand-Alone Rifle Rated multi-curve Hard Plates or the DFNDR Armor Medium Level IV Stand-Alone Rifle Rated multi-curve Hard Plates with ICEPLATE EXO® and ICEPLATE® Curve with an ICEPLATE® MOLLE Sleeve Pro, as ICEPLATE EXO® is specifically designed to fit Medium ESAPI armor plate profiles. Important note: all DFNDR body armor sales are final due to safety considerations. ITAR restricted. Not for export unless approved under ITAR by the U.S. Department of State.


SwiftClip or G-Hook Compatible
Laser-cut slits measuring approximately 7.5" on center for compatibility with SwiftClip or G-Hook equipped placards. 

[ SPECIFICATIONS ]


Weight: 15.2 ounces (plate bags, Shoulder Shrouds, Side Strap) to 23.2 oz (AXL Equinox Cummerbund)
Size: S/M or L/XL (Depending on size variant selection)
Attachment Mechanisms: MOLLE, Velcro, SwiftClip, G-Hook
Armor Plate Compatibility: S/M:
Medium Shooter/Swimmer or ESAPI (9.5” x 12.5” x 1.1”)
Medium Shooter/Swimmer SAPI (10" x 12" x 0.75")
L/XL:
Large Shooter/Swimmer or ESAPI (10.25" x 13.25" x 1.1")

Materials: ICEPLATE EXO® laminate, Velcro®, Nylon 12, Shock Cord, 500D Nylon outer (IRR compliant)
NIR Compliance: All ICEPLATE EXO® Gen 3 variants except HiVis are covered in 500D Cordura for NIR compliance.

View Plate Carrier Weight Calculator

[ WHAT'S INCLUDED]


SIDE STRAP

1 x Front Plate Bag
(S/M or X/XL depending on selection)
1 x Rear Plate Bag
2 x Tri-Fold Shoulder Shrouds
(S/M or X/XL depending on selection)
1 x MOLLE Placard
2 x Swift Clips
2 x Side Strap
1 x 48" length of 1/8" Shock Cord

AXL EQUINOX CUMMERBUND

1 x Front Plate Bag
(S/M or X/XL depending on selection)
1 x Rear Plate Bag
2 x Tri-Fold Shoulder Shrouds
(S/M or X/XL depending on selection)
1 x MOLLE Placard
2 x Swift Clips

2 x AXL SPC Tubes Adapter
2 x AXL Equinox Retainers
2 x AXL Wedges
1 x AXL Equinox Cummerbund
(S/M or X/XL depending on selection)
1 x 48" length of 1/8" Shock Cord
1 x 25" length of 3/8" Shock Cord
2 x Extra Cummerbund Pull Strings

[ VIDEOS ]


[ TURBOCHARGERS ]


ICEPLATE® Curve

THIN BUT CURVY


  • Cooling - Fill and freeze ICEPLATE® Curve for up to 70 watts of conductive cooling per ICEPLATE® Curve - an unrivaled performance edge.
  • Heating - Fill ICEPLATE® Curve with hot water for up to 52 watts of conductive heating power per ICEPLATE® Curve and an incredible competitive advantage in even the harshest climates.
  • Hydration - Each ICEPLATE® Curve holds 50 fl oz (1.5 L) of water.
  • One-Way Valve - The one-way valve allows air into ICEPLATE® Curve (drinkable option only), improving flow rate by more than 100% for an effortless drinking experience.
  • Integration - Each plate bag is designed to accept ICEPLATE Curves or Medium ESAPI profile armor plates. When using armor plates with ICEPLATE EXO® Gen 3, add IMS Pro Combo for internal or external mounting of ICEPLATE® Curve.

ICEVENTS®

LESS IS MORE


  • Convection - Stand-off, omnidirectional ventilation facilitates Convection (evaporative cooling).
  • Hydrolysis Resistance - Will not absorb/retain water, sweat.
  • Anti-microbial - Totally permanent, ICEVENTS® are antimicrobial at the molecular level, meaning the characteristic cannot be washed away.
  • Integration - ICEVENTS® Aero Ventilated Shoulder Pads evenly distribute load across your shoulders, reducing unnecessary strain. ICEVENTS® Classic Ventilation Pontoons (one pair included) provide stand-off ventilation between your body and your plate bag. Use one pair per plate bag as desired. 

Above: ICEPLATE EXO® Gen 3 shown with internally mounted IMS Pro Gen 3 Combo for plate carrier cooling/heating/hydration.

[ FEATURES ]


[ RESOURCES ]



For bulk Corporate/Unit/Agency orders of 100+ units or to request a quote, please email help@americanapipedream.com


SHIPPED BY: Qore Performance


Plate Bag Size + Color
Cummerbund
Material

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Curious About Sizing?

Given the massive variety of clothing we carry, a standard sizing guide is incredibly helpful for customers seeking the best fit.

Please understand that surplus varies widely in fit and cut and this sizing chart is general advice rather than tailor-level fitting.

Nearly every military has different sizing charts and schemes, which is why we've taken the time to put together this brief tutorial.

 

Jacket & Shirt Sizing

In absence of an established military size chart, we measure each jacket or shirt from armpit to armpit to get a rough idea of how it fits. If a garment is between sizes, we mark it one size down. For example, if a shirt measures 19.75" from pit to pit, it is marked as a small rather than medium.

To measure pit to pit, close up your shirt or jacket and measure from armpit to armpit. 

This is our measurement guide that we use to measure garments without an existing military size chart:

14"-15" PtP = XXS

16-17" PtP = Extra Small

18"-19" PtP = Small

20-21" PtP = Medium

22-23" PtP = Large

24-25" PtP = Extra Large

26-27" PtP = XXL

28-29" PtP = 3XL

Pant Sizing

We typically convert pants to US waist and inseam sizes. If a pair of pants is between sizes, we mark it one size down. For example, if a pair of pants measures as a 33 waist, it is marked as a 32 waist.

To take these measurements we lay a pair of pants flat on the ground. We then measure across the waist and double the measurement. For example, if a pair of pants measures 16" across the waist it will fit a US 32 waist.

To determine inseam we measure from the crotch seam to the bottom of the cuff. For example, it a pair of pants measures 30" from the crotch seam to the bottom of the cuff we will list it as a 30 inseam or 30L.

Surplus Condition Guide

  1. Unissued
    1. These items are brand new. They may sometimes exhibit signs of storage. They may be new in their original factory packaging, but most times will not be. 
    1. Issued; Good / Issued
      1. These items are in issued/used condition but are fully functional. This grade of surplus item may also exhibit signs of use such as stampings, small stains or general dirtiness.
      2. Issued items will not have missing or broken buttons, zippers or be missing any functional components unless noted as such in the product description. Any items you purchase that are marked as "Issued; Good" but exhibit these defects will be replaced free of charge by Americana Pipedream.
      1. Grade 2
        1. These items are in issued/used condition but have defects that impede function. This may include missing buttons, broken zippers, holes and tears. They may also be missing components.
        2. This is the lowest grade of surplus item that we carry and they are not eligible for returns or exchanges due to condition.

      Prop 65 Warning

      All products that are NOT INTENDED FOR CONSUMPTION OR NOT FOOD PRODUCTS fall under this warning:

      “WARNING: This product contains a chemical known to the State of California to cause cancer.” WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”

      Delivery and Shipping

      Americana Pipedream keeps its inventory on-hand and ships directly to you from our warehouse in Appleton, Wisconsin.

      We typically ship orders within 3-5 business days. During busy periods this can be 7-10 business days, sometimes longer. We are a small business and appreciate your patience.

      Payment & Security

      Payment methods

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Visa

      Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.